Eleaf iPower 80W: A Vape Overview

eleaf-ipower-banner

eleaf-ipower-mod-woodThe successor to the iStick 50w; Eleaf’s iPower boasts a huge 5000-mAh built-in battery, along with a maximum output of 80W, and range of modes that include Temperature Control (TC), Variable Wattage (VW), Temperature Coefficient of Resistance (TCR), Bypass, and the brand new Smart Mode.

Eleaf took the iStick 50w and redesigned it from the ground up, giving it a sleek and classy finish, and in a range of different colours.

The iPower’s wattage output ranges from 1w up to 80w, with the resistance range of between 0.1 – 3.5ohm in VW, and 0.05 – 1.5ohm in TC mode. The temperature range in TC mode (Stainless Steel, Ni200, Titanium and TCR (M1, M2 & M3) ranges between 100 – 315C, or 200 – 615F, depending on your measurement preference.

Improvements Eleaf have made include the obvious massive increase in battery capacity; the 5000mAh built in battery giving easily enough power for days, while still remaining light, and not affecting the weight of the device. It remains exceptionally lightweight.

Eleaf have also additional reset button, along with the standard click buttons for plus and minus variables. The reset button can be used by holding the ‘up’ button and the reset button together, and this is just a precaution incase the device does not power on after an upgrade.

eleaf-ipower-mod-screen

Eleaf has also included TCR mode (Temperature Coefficient of Resistance) which allows for a much more accurate reading of the heat and resistance,  and also Bypass mode giving the option to use it as a ‘mechanical mod’. We advise caution to be taken with Bypass mode, as this will have an immense drain the battery.

Smart mode is a huge improvement to the Eleaf software, allowing you to save a specific wattage with a specific tank with its resistance set, so that whenever you add that particular tank with that same resistance, the mod will load up the pre-set saved earlier.

When switching your tank for another, it will still save when reusing the previous tank.

One of the only drawbacks to the iPower is the location of its charging port, situated at the bottom for the device. While this adds a slight inconvenience for charging it, the mod itself is comfortable and perfectly sized, and the finish is sleek and looks classy making any tank look great on it.

Eleaf’s iPower 80w would be suitable for the intermediate vapers that are looking for a mod to suit all tanks, as the addition of Smart mode allows for easy swapping of flavours, having wattages saved already for particular tanks and coils. This mod will also be suitable for those looking for a mod that doesn’t need to be charged daily and those looking for a TC mode.

eleaf-ipower-banner2


To speak to us about Eleaf’s iPower, or any of the other products on our site, please get in contact with us via phone or email.